Cooling Fan Error

Symptom:
When the error occurs, the LED indicator does not light up.

Possible Cause:
A short circuit has occurred in the LED light.

Solution:
Please contact service for repair.

Bluetooth Connection Error

Symptom:
Connection drops unexpectedly, cannot reconnect, or disconnects during pairing.
This may be related to an issue with the UI board.

Possible Causes:

• Bluetooth is not enabled

• Another device is already connected and occupying the channel

• On Android devices, GPS is not enabled

Solution:
It is recommended to use a dedicated smartphone or tablet for connection.

Symptom:
Abnormal noise from the bean discharge support.

Possible Cause:
The slide rail is not lubricated, or the lubricant has dried out.

Solution:
Apply lubricant to the slide rail.

Symptom:
Metal knocking or rubbing noise from the heating element.

Possible Cause:
The heating element is deformed.

Solution:
Please contact service for repair.

Symptom:
The heating element does not heat up
(short preheating time exceeds 20 minutes).

Possible Cause:
An electrical circuit issue during installation may have caused damage to the heating element.

Solution:
Please have a qualified electrician inspect the electrical circuit.
If the issue persists, please contact service for repair.

Symptom:
The heating element is rubbing against the drum.

Possible Cause:
The screws are not tightened properly, or the heating element is bent incorrectly.

Solution:
Please contact service for repair.

Abnormal Condition:
Combustion inside the drum

Possible Cause:
Overheating caused by failure to shut down the machine

Corrective Action:

1. Remove loose debris first
   Wipe away dust and solid residues so the enzymatic cleaner can work effectively without interference.
2. Apply the enzymatic cleaner
   Spray or apply the cleaner directly onto the soiled area.
   Enzymes are especially effective on grease, proteins, and food residues.
3. Allow sufficient dwell time (very important)
   Let the cleaner sit for several hours, or longer for heavy or stubborn stains.
   Enzymes need time to break down organic matter—do not wipe too quickly.
4. Scrub or wipe the surface
   Use a brush, sponge, or cloth to remove the loosened and decomposed dirt.
5. Rinse with clean water and wipe dry

Symptom:
Abnormal noise from the drum.

1. A sound of coffee beans colliding

2. Continuous abnormal noise from the shaft (may be accompanied by beans dropping), or a rubbing sound between the drum and the machine body

Possible Causes:

1. There are leftover beans inside the drum

2. The timing pulley is not properly tightened, or there is an issue with the rear bearing / shaft support

   This may require shaft realignment, chain tension adjustment, or correcting the shaft angle

Solution:

1. Manually discharge the beans

2. Record a video or audio and send it to customer service for evaluation

Symptom:
The drum motor does not rotate.

Possible Cause:
The motor is damaged or the DC board is faulty.

Solution:
Please contact service for repair.

Symptom:
No abnormal noise occurs during normal startup and operation, but abnormal (resonant) noise appears after heating begins (during either temperature increase or decrease).

Possible Cause:
The fan wheel may be loose.

Solution:
Record a video or audio and send it to customer service for evaluation.
If it is confirmed that the fan wheel is loose, you may tighten it yourself.